Roland VS-1680 Instrukcja Właściciela Strona 198
- Strona / 212
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Settings for the VS-1680
1. Hold down [SHIFT] and press [F5 (SYSTEM)].
The System menu icon is displayed. If the System
menu icon does not appear, then press [F6 (EXIT)].
2. Press [F4 (MIDI)]. If “MIDI” does not appear in
[F4], first press [PAGE] until “MIDI” is displayed,
and then press [F4 (MIDI)].
3. Press [ ], [ ], [ ], and []to move the
cursor. Rotate the TIME/VALUE dial to make the
settings as described below.
MIDI Thru (MIDI Thru Switch)
This switches the function of the MIDI OUT/THRU
connector. For now, set this to “Out.”
Out: The connector transmits MIDI message such as
metronome Note messages or MTC from the
VS-1680.
Thru: MIDI messages received at the MIDI IN connec-
tor are retransmitted from the connector with-
out any changes.
SysEx.Rx (System Exclusive Receive Switch)
Exclusive messages are received when this is set to
“On.” At this time, set this to “On.” The Exclusive
messages can be received when the VS-1680 is in Play
condition.
MMC (MMC Mode)
This setting determines how the VS-1680 implements
MMC. Set this to “SLAVE.”
Off: MMC is neither transmitted nor received.
MASTER: MMC is transmitted. The VS-1680 func-
tions as the master device for external
MIDI equipment.
SLAVE: MMC is received. The VS-1680 functions as
a slave device for external MIDI equip-
ment.
Control Type (Mixer Control Type)
This selects the type of MIDI messages that will be
used when transmitting mixer settings to an external
MIDI device, or when MIDI messages from an exter-
nal MIDI device are used to control the mixer. At this
time, set this to “C.C.”
Off: MIDI messages related to mixer operation are
not transmitted or received.
C.C.: The mixer is controlled using Control Change
messages.
Excl: The mixer is controlled using Exclusive mes-
sages.
4. Hold down [SHIFT] and press [EXT SYNC].
5. Press [ ], [ ], [ ], and []to move the
cursor. Rotate the TIME/VALUE dial to set each
of the values.
Sync Source
This determines how the VS-1680 is synchronized with
other devices. Here, set this to “INT.”
INT: The VS-1680 runs according to its own internal
clock. Select this setting when you are not syn-
chronizing with other devices or when you
want external MIDI devices to be controlled by
synchronization signals from the VS-1680.
EXT: The VS-1680 is controlled with synchronization
signals (MTC) from the connected external
MIDI device. In this case, the VS-1680 does not
operate unless it is receiving MTC signals. Select
this setting when you want to use the MTC
from an external MIDI device to control the VS-
1680.
Sync Gen (Generator)
This selects the type of synchronization signal trans-
mitted from the MIDI OUT connector. For now, set
this to “MTC.”
Off: Synchronization signals are not transmitted.
MTC: MIDI Time Code is transmitted.
MIDIClk: MIDI Clock according to the Tempo Map is
transmitted.
SyncTr: MIDI Clock data recorded on the sync track
is transmitted.
Sync MTC Type
This selects the MTC type (30, 29N, 29D 25, 24). Select
the MTC of Cakewalk so that it matches that of the
master VS-1680. Here, set this to “30.”
6. Press [PLAY (DISPLAY)].
Return to Play condition.
Chapter 13 Takein Advantages of the VS-1680 (idea and examples)
198
- OWNER'S MANUAL 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- SAVE THESE INSTRUCTIONS 2
- USING THE UNIT SAFELY 3
- IMPORTANT NOTES 5
- Handling the Disk Drive 6
- Concerning Copyright 6
- Disclaimer of Liability 6
- About the License 6
- Agreement 6
- CONTENTS 10
- Preparations 12
- Simple Operation 13
- Connectivity 13
- Substantial Options 13
- Front and Rear Panels 14
- Recorder Section 16
- Rear Panel 18
- Saving and Managing Data 20
- About Events 22
- About Button Names 22
- Mixer Section 23
- Input Mixer 25
- Track Mixer 26
- Switching the Fader Functions 26
- Effects Section 30
- Chapter 2 Basic Operation 31
- Before You Finish Operations 32
- Basic Operations on the 33
- Track Mixer Master Block 35
- Switching Track Conditions 36
- Changing the Current Time 36
- Storing a Time Location 36
- Auxiliary Cursor Cursor 37
- 0123 456 38
- 00h00m00s00 Time 38
- Storing Mixer Settings 39
- Recalling EZ Routing 56
- Deleting EZ Routings 57
- Recording 58
- General Course of the 60
- Recording Process 60
- Connecting Instruments 60
- Recording to the Tracks 61
- Master Send Switch 62
- Master Send Pan 62
- Saving a Recorded 63
- Performance (Song Store) 63
- Recording Over a Portion of 63
- (Punch-In/Punch-Out) 63
- Playback 64
- Start Punch-in Punch-out Stop 64
- Area (Loop Recording) 66
- Recording to Other Tracks 68
- (Overdubbing) 68
- MASTER OUT 73
- Recording Digital Signals 74
- Adjusting the Tone 75
- (Equalizer) 75
- Combining the Contents of 77
- Tracks (Track Bouncing) 77
- Effect Switch 79
- Send Level 79
- Send Pan 79
- Creating a Master Tape 80
- Protecting Songs 81
- (Song Protect) 81
- Protecting Performances 82
- To Remove Song Protect 82
- About Editing Operations 83
- Track Edit 83
- Start End To Time 84
- Inserting a Blank Space Into 87
- TimeStart End 88
- Start End Time 89
- Performance Data (Track Time 90
- Compression/Expansion) 90
- Naming Tracks (Track Name) 91
- Performance Data 92
- Other Song 92
- Current Song 92
- Current Drive 92
- Current playback time 93
- Phrase to be edited 93
- Phrase not to be edited 93
- TO TimeFROM 94
- Moving Phrases (Phrase Move) 96
- Sound (Trim In) 97
- Sound (Trim Out) 98
- Naming Phrases (Phrase Name) 102
- Composition of the Effects 103
- Connecting the Effects 103
- Effect Insert Switch 104
- Insert Send Level 104
- Insert Return Level 104
- Effect Send Level 106
- Effect Send Pan 106
- Effect Send Switch 106
- Return Level 107
- Return Balance 107
- Selecting Effects (Patch) 108
- Current EffectCursor 109
- Function Buttons 109
- Patch Number Patch Name 110
- Connecting the Zip Drive 111
- Initializing the Disk 111
- (Drive Initialize) 111
- Saving Performance Data to 113
- (Playable) 114
- Single Disk (Archives) 117
- Saving to Disks (Store) 117
- Connecting the CD-R Drive 120
- Creating an Audio CD 120
- Writing Songs to CD-R Discs 121
- Added SongPrevious Song 124
- Track Number 124
- Saving Songs to CD-R Discs 125
- (CD-R Backup) 125
- Loading Songs From CD-R Discs 126
- Synchronizing with MIDI 128
- Sequencers 128
- MIDI Sequencer 129
- (implements MTC) 129
- Synchronization with the MIDI 130
- Using the Sync Track (Master) 131
- What is the Sync Track? 132
- Recording MIDI Clock Messages 132
- Synchronized Operation 132
- Using the Tempo Map (Master) 133
- What is a Tempo Map? 133
- = (Tempo) 134
- Start Times 137
- Use with a MIDI Controller 138
- Switching Effects 139
- Adjusting Effects 139
- Before Backing Up with DAT 140
- Saving Song Data to a DAT 141
- Recorder (Backup) 141
- Loading Performance Data 143
- (Recover) 143
- Checking Names of Saved 145
- Performance Data (Name) 145
- Checking the Recording 146
- Condition of Saved 146
- Performance Data (Verify) 146
- DAT recorder 147
- Digital Out 147
- Chapter 10 Compatibility 148
- Converting VS-1680 Song 150
- Data for Use with the VS 150
- 880 (Song Export) 150
- 880/VS-880EX (Song Export) 152
- When VS-880, VS-1680 and 153
- VS-880EX Format Song Data 153
- Previewing Techniques 154
- (Preview) 154
- Begins (example) 155
- Adjusting the Scrub Length 155
- Recalling a Specific Location 156
- Recording Mixer Settings 156
- (Auto Mix) 156
- Auto Mix to be edited 159
- Setting Value 159
- Undoing Recordings and 160
- Edits (Undo) 160
- Listening Only to a Specific 162
- Channel (Solo/Mute) 162
- About Solo Mode 163
- Simultaneously Adjusting a 164
- Stereo Source (Stereo Link) 164
- Mixing In a Stereo Source 165
- (Stereo In) 165
- Changing the Pitch During 166
- Playback (Vari-Pitch) 166
- SpaceSpace 167
- MIDI IN B 168
- When the Disk Has Little 169
- Remaining Space 169
- Data (Song Erase) 170
- Performance Data (Song Name) 171
- Rearranging the Order of 171
- Song Data (Song Arrange) 171
- Changing the Name of 171
- Dividing Performance Data 172
- Into Two Parts (Song Split) 172
- Connecting Performance 173
- Data (Song Combine) 173
- Adjusting the Levels for Each 174
- When Using Balanced Inputs 174
- Determining Output 175
- AUX Jacks 176
- DIGITAL OUT Connectors 176
- DIRECT OUT 177
- Confirming That a Drive is 178
- Not Damaged (Drive Check) 178
- Switching the Display Content 180
- Track Channel 181
- Lower Part of the Display 182
- Actual volume level 184
- Each fader position 184
- Holding Level Meter Peaks 185
- When Using the Foot Switch 186
- Overall Settings for the VS 187
- 1680 (Global Parameters) 187
- Displaying Measures and Beats 188
- Current Time 189
- M1 M2 M3 M4 M5 189
- Stopping the Cooling Fan 190
- Overall Settings for 191
- Playback and Recording 191
- (Play/Record Parameters) 191
- Resetting Mixer and System 192
- Settings to Their Original 192
- To Have a Message 193
- Displayed at a Specified Time 193
- MASTER SLAVE 194
- Settings for the VS-1680 198
- Cakewalk 199
- Recording to Cakewalk 200
- Recording to the VS-1680 201
- Using an External MIDI 202
- Device to Adjust the Mixer 202
- (Compu Mix) 202
- 30 MST Offset Balance 203
- 89 MST Offset Balance 203
- Preparations for Compu Mix 204
- Recording with Compu Mix 204
- INPUT OUTPUT 207
- Information 210
Powiązane produkty i podręczniki dla Instrumenty muzyczne Roland VS-1680
(32 strony)
(224 strony)
(24 strony)
(16 strony)
(2 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 2.419 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji