If You Don’t Want to Record Fader
Settings (Mask Fader)
You can specify that the settings adjustable from the
top panel will not be recorded, as described in
“Recording the Mixer Settings, Method 1 (Snapshot).”
For example, this is effective when you have made
fade-in settings as in “Recording the Mixer Settings,
Method 2 (Gradation)”, and then wish to modify effect
send levels or other settings.
1. Hold down [SHIFT] and press [F6 (UTILITY)].
The Utility menu icon is displayed.
2. Press [F5 (A.mix)]. If “A.mix” does not appear in
[F5], first press [PAGE] until “A.mix” is dis-
played, and then press [F5 (A.mix)].
3. Rotate the TIME/VALUE dial to set Snap mode.
At this time, select “Mask Fader.”
Snap Mode
This selects the settings that will be recorded by the
snapshot.
All: All settings are recorded.
MaskFader: Channel faders settings are ignored.
4. Press [PLAY (DISPLAY)].
Return to Play condition.
5. Record the Snapshot as described in “Recording
the Mixer Settings, Method 1.”
Playing Back the Auto Mix
1. Press [AUTOMIX].
The button indicator lights, indicating that the VS-1680
is in Auto Mix mode.
2. Select the channels for which you want Auto
Mix played back. While pressing [AUTOMIX], so
that each button indicators light, press the input
channel or track channel SELECT button or the
Master Block [EDIT] button.
3. Press [PLAY].
Playback of Auto Mix begins.
Moving the channel faders or master fader while Auto
Mix is being played back cancels the Auto Mix for that
fader. If you stop and then start playback again, Auto
Mix will once again take effect. Alternatively, you can
temporarily disable Auto Mix during playback and
then enable it by turning it on again.
Making Changes to Auto Mix
(Micro Edit)
You can check and directly change the values for set-
tings pertaining to all of the Auto Mix’s data.
1. Hold down [SHIFT] and press [F6 (UTILITY)].
The Utility menu icon appears in the display.
2. Press [F5 (A.mix)]. If “A.mix” does not appear in
[F5], first press [PAGE] until “A.mix” is dis-
played, and then press [F5 (A.mix)].
3. Press [F2 (Micro)].
The Micro Edit screen appears in the display.
fig.11-13(micro.eps)
4. Press [ ].
The cursor moves to “Edit Target.” Rotate the
TIME/VALUE dial to select the Auto Mix you want to
edit.
5. Press [ ] and [ ] to move the cursor. Rotate
the TIME/VALUE dial to edit each of the differ-
ent settings values.
* What can be edited here is the
Auto Mix data. If you
want to change markers, then please refer to “Making
Fine Adjustments to Marked Locations” (p.38).
6. Repeat Steps 4 and 5 for any other Auto Mix you
wish to edit.
7. When you have finished editing, press [PLAY
(DISPLAY)].
Return to Play condition.
Komentarze do niniejszej Instrukcji