Roland VS-1680 Instrukcja Właściciela Pobierz pdf (Strona 163)

About Solo Mode

If you press [SOLO (MASTER)] while holding

[SHIFT], SOLO Mode turns on. Operation is as fol-

lows.

1. Press [SOLO (MASTER)] while holding [SHIFT].

"---SOLO MODE---" blinks in the display and indicates

SOLO Mode is on. At the same time, indicators of the

SELECT buttons for input and track channels blink.

With this status, every channel can be monitored.

2. Press any of channel select buttons you wish to

monitor.

Indicator of the button flashes and you can monitor

only this channel. Fader, balance, equalizer, effects

and so on are effective on each channel.

3. Everytime you press the SELECT button, monitor

and mute status switch. Only when holding

[AUTOMIX], you can check the automix status of

each channel.

4. To turn the SOLO Mode off and go back to PLAY

condition, press [SOLO (MASTER)] again while

holding [SHIFT].

If, in contrast to the Solo function, you wish to mute

only specific channels, use the following procedure.

1. Hold down [MUTE (FADER)].

This turns the Mute function on; the SELECT button

indicators for all input or track channels are all blink.

In the present status, all input or track channels are

monitored.

* By holding down [MUTE (FADER)], you can set a

0.3–2.0-second range (p. 190).

2. While holding down [MUTE (FADER)], press the

SELECT button for the input or track channel you

wish to mute.

The button indicator goes off, and only that channel is

now muted.

fig.11-19(mute.eps)

3. Monitor and Mute alternate each time you press

[MUTE (FADER)] and SELECT button. You can

also mute two or more channels.

4. Hold down [CLEAR] and press [MUTE (FADER)]

allows you to monitor all channels.

Selecting the Channels to be Monitored

You can also select which channels to monitor

through each channel’s Edit screen. Use the fol-

lowing procedure.

3-1. Press the SELECT button for the input or

track channels you wish to monitor.

3-2. Press [F3 (SOLO)]. If “SOLO” does not

appear in [F3], first press [PAGE] until

“SOLO” is displayed, and then press [F3

(SOLO)].

3-3. Rotate the TIME/VALUE dial.

You can monitor the channels for which you have

selected “On.”

3-4. Press [PLAY (DISPLAY)].

Return to Play condition.

Selecting the Channels to be Muted

You can also select which channels to mute

through each channel’s Edit screen. Use the fol-

lowing procedure.

2-1. Press the SELECT button for the input or

track channels you wish to mute.

2-2. Press [F4 (Mute)]. If “Mute” does not appear

in [F4], first press [PAGE] until “Mute” is

displayed, and then press [F4 (Mute)].

2-3. Rotate the TIME/VALUE dial.

You can mute the channels for which you have

selected “On.”

2-4. Press [PLAY (DISPLAY)].

Return to Play condition.

Chapter 11 Other Convenient Functions

163

Chapter 11

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 211 212

Komentarze do niniejszej Instrukcji

Brak uwag

Roland VS-1680 Instrukcja Właściciela Strona 163

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Instrumenty muzyczne Roland VS-1680