Roland VS-1680 Instrukcja Użytkownika Pobierz pdf (Strona 13)

Aborted Command!

Illegal Request!

This disk drive cannot be used by the VS-1680.

Already Selected

The currently selected disk drive was selected. If you

wish to switch to another disk drive, re-select the disk

drive.

Arbitration Failed!

Busy Status!

Check Condition!

Status Error!

Normal communication with the disk drive could not

be accomplished. Make sure that the disk drive is con-

nected correctly.

Blank Disc

You have tried to run the CD player function using a

disc that has no performance data on it. Insert a com-

mercial CD or CD-R with material already recorded

on it.

Can’t Communicate!

Drive Time Out!

Message Error!

Phase Mismatch!

Undefined Sense!

Drive Unknown Error!

There is a problem with the connections to the disk

drive. Make sure that the disk drive is connected cor-

rectly.

Can’t REC CD!

With the factory setting, digital connections cannot be

made with a CD player. Please read “To Recording

Digital Signals” (Owner’s Manual p. 74).

Can’t Recover

The drive check Recover procedure could not be exe-

cuted because there was insufficient free space on the

disk. Delete unneeded songs. Alternatively, perform

the Song Optimize procedure.

Can’t Set Marker

No more than two track number mark points can be

set within a four-second interval.

Change Int CLK?

No digital signal is being received at the DIGITAL IN

connector. Select whether or not to switch the sample

rate reference clock to the internal clock. Pressing

[YES] switches the VS-1680 to the internal clock. After

checking to make sure that all digital devices are prop-

erly connected and those sample rates for all devices

match, carry out the operation once more.

Digital In Lock

The sample rate reference clock is set to the digital sig-

nal coming from the DIGITAL IN connector. You can

record using the digital connection.

Digital In Unlock

The digital signal is not being input through the DIGI-

TAL IN connector, or the sample rate set for the song

and the sample rate of the digital device connected to

the DIGITAL IN connector are different. In this state,

you cannot record using the digital connection.

The sample rate specified for the song is different than

the sample rate of the digital device connected to the

DIGITAL IN connector. Press [YES], and set the sam-

ple rates of both devices to match.

Disk Memory Full!

There is insufficient free area on the disk. Erase

unneeded data. Or, select a different disk drive.

The maximum number of songs that can be recorded

on one partition (200) has been exceeded. Delete

unneeded songs. Or, select a different disk drive.

Drive Busy!

If this message appears when you first begin using a

disk drive with the VS-1680, the disk drive is not fast

enough. When using this disk, create a new song with

a lower sample rate or recording mode, and record

using this song.

If this message appears after you have been using the

disk drive with the VS-1680, the data on the disk drive

has become fragmented, causing delays in reading and

writing data. Either use the track bouncing operation

to re-record playback data to another track, or use the

optimize operation. If the same message appears even

after these measures have been taken, copy the song

data to another disk drive and initialize the disk drive

that produced the problem.

Event Memory Full!

The VS-1680 has used up all the events that can be

handled by one song. Delete unneeded auto mix data.

Alternatively, perform the Song Optimize operation.

Error Messages

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 135 136

Komentarze do niniejszej Instrukcji

Brak uwag

Roland VS-1680 Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Instrumenty muzyczne Roland VS-1680