Roland VS-1680 Instrukcja Właściciela

Thank you, and congratulations on your choice of the Roland VS-1680 V-XPANDEDDigital Studio Workstation.As the owner of the VS-1680 V-XPANDED, you can

11Mix 16 tracks down to 2 tracks (Mastering Room)fig.2-113. Press [F6] to cycle between “M→Rec” → ”M→Play” → ”M→Off.” The current status of the master

12Mix 16 tracks down to 2 tracks (Mastering Room)fig.2-033. Press [ENTER (YES)].4. Use [ ], [ ], [ ], and [ ] to move the cursor to “Status.”fig.2-185

13Mix 16 tracks down to 2 tracks (Mastering Room)14. Hold down [STOP], and press [STATUS] for all tracks (1–15/16) that you wish to mixdown. The STATU

14New effects algorithmsWhen the VS8F-2 effects expansion board is installed, the following effects algorithms will be added.- Making the volume consi

15New effects algorithmsBCut (Bass-cut filter)This removes unwanted low-frequency components, such as pop noise.Sw (Switch) Off, OnTurns the bass-cu

16New effects algorithmsCmp (Compressor)When a high-level signal is input, this effect restricts the output at a specified ratio.fig.3-06Sw (Switch)

17New effects algorithmsDither Off, 24–8bitBy adding a minute level of noise (dither), this smoothes the transition between playback audio and silen

18New effects algorithmsLmt (Limiter)This effect limits excessive output levels.Sw (Switch) Off, OnTurns the limiter on/off.Thresh (Threshold) -60

19Editing an automixAs part of the new software, select the area to edit. You can now select an area (marker), and edit the automix data in that area.

20Editing an automixfig.4-05_80TargetThis will indicate the type of automix data that you selected to be erased in step 6. If you wish to erase all au

3Table of ContentsTable of Contents...3Precautions ...4Added

21Editing an automixNOTEEven if there is only one marker for the automix data that you wish to copy, press the button in the order of [F1 (In)]→ [F1 (

22Editing an automix1. Press [PLAY (DISPLAY)].2. Hold down [SHIFT] and press [F6 (UTIL)].3. Press [PAGE] so that [F5] indicates “A.Mix,” and then pres

23Editing an automixfig.4-18.e11. To execute the Gradation operation, press [F4 (Exec)]. If you press [F6 (EXIT)], you will return to step 7 without e

24Editing an automixfig.4-04.eNOTEEven if there is only one marker for the automix data that you wish to increase or decrease, press the button in the

25Using the VS-1680 with a CD-R/CD-RW driveThis chapter explains how a CD-R/CD-RW drive connected to the SCSI connector of the VS-1680 can be used to

26Using the VS-1680 with a CD-R/CD-RW drive5. A message will ask for confirmation. Press [YES].fig.5-046. The display will ask “STORE Current?” (store

27Using the VS-1680 with a CD-R/CD-RW drive9. Press [F4 (Exec)].10. Press [YES]. A message about the license agreement will appear. Read the message c

28Using the VS-1680 with a CD-R/CD-RW drive+VerifyIf this is turned “On,” verification will be performed to check whether or not the data was saved co

29Using the VS-1680 with a CD-R/CD-RW drive5. Press [F3 (CDRRc)]. If [F3] does not indicate “CDRRc,” first press [PAGE] so that “CDRRc” appears, and t

30Enhancements related to operationShortcut to the Phrase Edit windowIn Play condition, you can now select the phrase that you wish to edit, and open

4Precautions● Unfortunately, it may be impossible to restore the data stored on a Zip disk or other form of media once it has been erased, initialized

31Enhancements related to operationfig.6-04.efig.6-05.efig.6-06.e7. Use the TIME/VALUE dial to select the take that will be the basis of the newly cre

32Enhancements related to operationfig.6-035. Press [F1 (Take)].6. Use the TIME/VALUE dial to move the cursor to the take that you wish to delete.fig.

33Enhancements related to operationAt this time, the function buttons have the following operations.[F1 (Hist)]: Each time you press the button, you w

34Enhancements related to operationfig.6-16_707. Press [F1 (Back)].8. Use [ ][ ][ ][ ] to move the cursor, and use the TIME/VALUE dial to set the para

35Enhancements related to operation1. Press [PLAY (DISPLAY)].2. Hold down [SHIFT] and press [F2 (TRACK)].3. Press [F1 (Tr/Ph)] so that the Phrase Edit

36Enhancements related to operationNOTEIf you rotate the MONITOR knob without pressing [SELECT], you will adjust the volume level. If you are attempti

37Enhancements related to operationCopying mixer settingsYou can copy mixer settings (equalizer, level) from another channel to the channel currently

38Enhancements related to operationShift Lock on/off ([SHIFT]+[YES])It is now possible to control the Shift Lock switch (which temporarily keeps [SHIF

39Enhancements to the display and specificationsChecking inserted effects (Icon and Patch Name display)Effects that have been inserted into channels/t

40Enhancements to the display and specificationsfig.7-04.e5. Press [PLAY (DISPLAY)]. You will return to Play condition.Switching the Song Select windo

5Added functionality (main features)Mixdown using the VS-1680 aloneWhile playing back sixteen tracks, you can mixdown to any two tracks of the 256 V-t

41Enhancements to the display and specifications3. Press [F4 (Exec)]. Alternatively, press [PAGE] so that [F4] indicates “Exec,” and then press [F4 (E

42IndexSymbols+Verify ... 28AAfter Rec (after recording) ...

InformationWhen you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.As of

6Expanding the functionality of the VS-1680There are several ways in which the new functions can be added to the VS-1680. Please read the section that

7Expanding the functionality of the VS-1680fig.1-0410. If you pressed [NO] in step 9, an additional message will ask you to confirm. If you wish to er

8Mix 16 tracks down to 2 tracks(Mastering Room)From the 256 V-tracks you can now select any two tracks, and mixdown to these two tracks as you play ba

9Mix 16 tracks down to 2 tracks (Mastering Room)StatusSpecify the status of the mastering tracks. For this example, select “Off.”Off: The mastering tr

10Mix 16 tracks down to 2 tracks (Mastering Room)12. Use the cursor buttons and the Value dial to change the "Status" of the tracks for mast