Roland FP-7 Instrukcja Użytkownika

07-01-2N04454689* 0 4 4 5 4 6 8 9 - 0 2 *

10 USING THE UNIT SAFELY Place in a well ventilated location 101b When using this device and AC adaptor, ensure that it is placed in a well ventilate

100 Recording FP-7’s Recorder has three Track buttons.You can play each hand of your performance separately, for example recording the left-hand part

101 Recording 3. Press the button of the track you want to record, so the button is blinking. This setting lets you record while listening to the sel

102 RecordingCorrespondence Between Recorded Performance and Track ButtonsA recorded performance will be assigned to the Track buttons as follows.●Se

103 Recording You can erase recorded performances. fig.Panel-DeleteSong.eps 1. Hold down the [Display] button and press the [Rec] button. A following

104 Saving a Performance A song you’ve recorded can be saved in internal memory or to USB memory.A song you’ve saved in internal memory can also be c

105 Saving a Performance A song you’ve recorded can be saved in internal memory or to USB memory.If you record a song and then turn off the power of

106 Saving a Performance Changing the Name of a Song 6. Hold down the [Display] button and use the [-] [+] buttons to select the character that you w

107 Saving a Performance Songs you’ve recorded on the FP-7 and your favorite performance settings (Registration) can be copied to USB memory (sold se

108 Saving a Performance 3. While holding down the [Display] button, use the [-] [+] buttons to select “External Memory.” 4. Press the [Display] butt

109 Saving a Performance Here’s how to delete a song you’ve saved in internal memory or USB memory. For details on handling USB memory, refer to “Usi

11 Important Notes In addition to the “USING THE UNIT SAFELY” listed on page 8, please observe the following cautions. Power Supply 301 • Do not conn

110 Saving a Performance 6. While holding down the [Display] button, use the [-] [+] buttons to select “Media.” 7. Use the [-] [+] buttons to select

111 Saving a Performance Here’s how you can copy a song saved in internal memory to USB memory.In this way, songs you’ve recorded on the FP-7 and sav

112 Saving a Performance 6. While holding down the [Display] button, use the [-] [+] buttons to select “Type.” 7. Use the [-] [+] buttons to select t

113 Saving a Performance Here’s how you can copy a song saved on USB memory to internal memory. Preparations for Copying 1. Prepare the songs that yo

114 Saving a Performance 7. While holding down the [Display] button, use the [-] [+] buttons to select “Type.” 8. Use the [-] [+] buttons to select t

115 Various Settings You can make a variety of performance- and recording-related settings in “Function Mode.”When playing ensemble with other instru

116 Various Settings You can play classical music such as baroque pieces using their original tuning.Most modern songs are composed and played with t

117 Various Settings When the pedal is pressed in Dual Play (p. 41) or Split Play (p. 43), the pedal’s effect is applied to both the Upper Tone and t

118 Various Settings A pedal connected to the Soft/(FC2) jack normally functions as a soft pedal (p. 21). A pedal connected to the Sostenuto/(FC1) ja

119 Various Settings Changing the Works of the Soft Pedal (FC2) When the instrument is turned on, this is set to function as a soft pedal. 1. Press

12 Important Notes 558a • Please enjoy your music in ways that do not inconvenience other people nearby, and pay particular attention to the volume a

120 Various Settings This specifies which part is to have priority when the effects assigned to the Upper Tone and Lower Tone differ in Dual Play (p.

121 Various Settings Some SMF music files created for karaoke contains lyric data. You can make this data appear automatically in the lyric screen wh

122 Various Settings You can change the Sound Control type that is selected when you turn on the power of the FP-7.You can also specify that Sound Co

123 Various Settings If you’ve connected an external device to the Input jacks and want to listen to the sound from it, the sound from the external d

124 Various Settings Sounds may become distorted as the Gain level increases.The equalizer will be turned on when you access the Equalizer screen.Thi

125 Various Settings You can adjust the sensitivity with which the keyboard responds to your playing. 1. Press the [Function] button. 2. Press the [T

126 Various Settings This sets the velocity the sound will have when the keyboard touch is set to “Off.”If you turn the keyboard’s touch sensitivity

127 Various Settings From the sets of audio files saved on USB memory (sold separately), here’s how to select the set of audio files that you’ll play

128 Various Settings 6. Use the [-] [+] buttons to select the audio file that will be played by the specified key. If you press the [-] [+] buttons s

129 Various Settings This sets session partner Intro and Ending on or off. When set to “Off,” pressing the [Session Partner] button causes the Intro

13 Important Notes CD Handling 801 • Do not touch or scratch the recording surface of a CD. Doing so may render the data unreadable. If a CD becomes

130 Various Settings Here’s how to specify the root note of the first chord of currently Session Partner’s chord progression. 1. Press the [Function]

131 Various Settings Here’s how you can mute a specific part so that it will not be heard when the song plays.You can also make settings so that only

132 Various Settings Normally, when you play back SMF music files that is compatible with Roland Piano Digital (p. 170), the left-hand part is assign

133 Various Settings 6. Press the [Rec] button. Initialization will begin.The entire contents of internal memory will be erased. * Never turn off the

134 Various Settings You can specify the time signature at which the metronome will sound.When you record your own performance, it will be recorded w

135 Various Settings You can restore the settings you’ve changed on the FP-7 to their factory-set condition. This operation is called “Factory Reset.

136 Various Settings Connecting the FP-7 to a V-LINK compatible image device allows you to control the images with the FP-7.To prevent malfunction an

137 Connecting Other Equipment Connecting Audio Equipment... 138 Sending the Sound to Exte

138 Connecting Audio Equipment By connecting audio equipment to the FP-7, you can listen to its sound from the speakers of your audio system, or list

139 Connecting Audio Equipment If you connect your CD player or cassette tape player to the FP-7 so that the sound is heard from the FP-7’s speakers,

14 Names of Things and What They Do [Power] Switch Turns the power on/off (p. 19). [Volume] Knob Adjusts the overall volume of the FP-7 (p. 20).If he

140 Recording an FP-7 Performance to an External Device Before connecting this unit to other devices, turn off the power to all units. This will help

141 Recording an FP-7 Performance to an External Device In order to use your computer to record a performance from the FP-7, you’ll need a drive that

142 Connecting the USB Memory (Sold Separately) You can use USB memory in the following ways on the FP-7. What you can doPageSave a song you’ve reco

143 Connecting to a Computer If you use a USB cable (commercially available) to connect the USB (MIDI) connector located on the FP-7’s rear panel to

144 Connecting a CD Drive (Sold Separately) By connecting a commercially available CD drive that is USB-compatible, you can use the FP-7 to play bac

145 Connecting a CD Drive (Sold Separately) Here’s how to play back commercially available music CDs, CD-ROMs containing SMF music files, or the CD-R

146 Connecting a CD Drive (Sold Separately) You can reduce the volume of the vocal portion of a commercially available music CD or an audio file, and

147 Connecting to MIDI Devices The FP-7 provides MIDI connectors so that performance data can be transferred between it and other devices. By using t

148 Connecting to MIDI Devices You can use the FP-7 to play sounds on another connected MIDI sound generating device (a sound module or instrument th

149 Connecting to MIDI Devices When you have a MIDI sequencer connected, set this parameter to Local Off. Since the Thru function of your sequencer w

15 Names of Things and What They Do [Contrast] Knob This knob adjusts the contrast of the screen (p. 22). [Display] Button Press this button when you

150 Connecting to MIDI Devices You can specify whether a tone selection message will be transmitted to the MIDI device connected to the FP-7 when you

151 Connecting to MIDI Devices If you want your recorded performance to be saved on a MIDI sequencer such as an MT-series unit (except for the MT-90s

152 Connecting to MIDI Devices 4. Press the [-] or [+] button to change the settings. 5. Press the [Display] button. Setting the Transmit Channel Her

153 Troubleshooting If you think there’s a problem, read this first. SymptomCause/Action PagePower does not turn on Is the power cord connected corre

154 Troubleshooting Can’t hear the recorder song Could the local control setting be turned “Off”?If the local control setting is “Off” when you play

155 Troubleshooting High-pitched ringing is heard If you hear this in headphones:Piano sounds that have a brilliant and crisp character contain subst

156 Troubleshooting Can’t record / play backCan’t record Has one of the track buttons for recording been selected? p. 95p. 100 The recorded performan

157 Error Messages * External Media: USB memory, etc.* Press [Display] button, and you can cancel the error message. IndicationMeaningError: 1 You ca

158 Tone List Piano 001 Grand Piano1002 Piano + Str.003 Grand Piano2004 Piano + Pad 005 Grand Piano3006 MagicalPiano007 Rock Piano 008 Piano+Choir 00

159 Tone List 096 Gt Feedback1097 Dist.Rtm Gt 098 Gt Harmonics099 Gt Feedback2100 AcousticBass101 FingeredBass102 Finger Slap 103 Picked Bass 104 Fre

16 Names of Things and What They Do Rear Panel These connectors are located at the rear panel. MIDI Connectors You can connect these to external MIDI

160 Tone List * -----: No sound.* [EXC]: will not sound simultaneously with other percussion instruments of the same number.2728293133353032343940414

161 Tone List * -----: No sound.* [EXC]: will not sound simultaneously with other percussion instruments of the same number.2728293133353032343940414

162 Tone List * -----: No sound.* [EXC]: will not sound simultaneously with other percussion instruments of the same number.2728293133353032343940414

163 Rhythm List No.Style NameChord ProgressionTempo 18-Beat Funk 16 1082 Guitar Funk 19 1043 8-Beat Pop 1 26 1084 Street Pop 51 945 8-Beat Rock1

164 Chord Progression Pattern List It is the Chord Progression Pattern List by each measure. These are basic chord progression pattern from No. 1 to

165 Chord Progression Pattern List 23Orig C → FM7 → C → F/G → VariDm7 G7 C Am7 Dm7 G7 C → 24Orig C → G → G7 → CC7 F → CAm7 Dm7 G C C7Vari FM7 → G → F

166 Chord Progression Pattern List Orig: OriginalVari: Variation 42Orig Gm → Am7 5D7 Gm → Am7 5D7Vari E6 D7 Gm7 C7 EM7 D7 Gm Gm43Orig C Dm Dm7/G C F

167 Chord Fingering List ● symbol: indicates the constituent notes of chords. ★ symbol: Chords shown with an “ ★ ” can be played by pressing jus

168 Chord Fingering List ● symbol: indicates the constituent notes of chords. ★ symbol: Chords shown with an “ ★ ” can be played by pressing just t

169 Internal Song List 981a * All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violati

17 Names of Things and What They Do Phones Jacks Here you can connect headphones. The FP-7 lets you use two sets of headphones simultaneously (p. 22)

170 Music Files That the FP-7 Can Use What Are Music Files? Music files contains musical information such as how long the key for a corresponding pit

171 Registration List The recommended settings were stored in the instrument when it shipped from the factory. Registration from 7-1 to 7-4 include t

172 Effects List Effect NameParameter Value Description EqualizerLow Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high ran

173 Effects List Stereo FlangerRate 0.05–10.00 Hz Frequency of modulation (Hz)Depth 0–127 Depth of modulation3D FlangerRate 0.05–10.00 Hz Frequency

174 Effects List Stereo Delay1Feedback 0– +80 % Adjusts the amount of the delay sound that’s fed back into the effect. Balance D100:0W–D0:100W Volume

175 Effects List Dist.–>Flanger (Distortion–>Flanger)Flanger Rate 0.05-10.00 Hz Frequency of modulation (Hz)Fl. Balance D100:0W-D0:100WAdjusts

176 Stored Settings Settings Stored in a Registration *1: Only the selected tone and rhythm-related settings are stored. Settings Stored While the Po

177 MIDI Implementation ChartFunction...BasicChannelModeNoteNumber :VelocityAfterTouchPitch BendControlChangeProgChangeSystem ExclusiveSystemCommonSy

178 Main Specifications FP-7: Digital Piano Keyboard 88 keys PHA II keyboard Touch Sensitivity 100 levels, Off (velocity adjustable) Sound Generator

179 Main Specifications * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without pri

18 Before You Play 1. Make sure that the [Power] switch located at the right side of the keyboard is off (in the upward position). fig.PowerOn.eps 2.

180 Index A AC Adaptor ... 18 All Song Play ...

181 Index K Key Off Resonance ... 64 Key Touch ... 48,

182 Index S Saving ... 104 Piano Designer Settings ...

183 MEMOFP-7-e.book 183 ページ ２００６年１２月１４日　木曜日　午前１０時５７分

184 MEMOFP-7-e.book 184 ページ ２００６年１２月１４日　木曜日　午前１０時５７分

185As of November 1, 2006 (ROLAND)Information When you need repair service, call your nearest Roland Service Center or authorized Rolanddistributor i

For the USADECLARATION OF CONFORMITYCompliance Information StatementModel Name :Type of Equipment :Responsible Party :Address :Telephone :FP-7Digital

Cover1,4

07-01-2N04454689* 0 4 4 5 4 6 8 9 - 0 2 *

19 Before You Play Once you’ve got everything connected properly, you can turn on the power using the following procedure. If you fail to perform the

Cover1,4

20 Before You Play Here’s how to adjust the volume when you’re playing the keyboard, or when you’re playing back internal preset songs or USB memory

21 Before You Play Connect the included pedal to one of the Pedal jacks.The operation of the pedal will differ depending on the jack to which it’s co

22 Before You Play You can use headphones to enjoy the FP-7 without disturbing those around you, such as at night. Since the FP-7 has two headphone j

23 Before You Play Songs you’ve recorded on the FP-7 or performance settings you’ve created (registration sets) can be copied for safekeeping to sepa

24 Listening to Songs Now, try listening to demo songs.The FP-7 comes with ten demo songs.The seven Tone buttons, the [Audio Key] button, the [Sessio

25 Listening to Songs 1. Hold down the [Function] button and press the [Transpose] button. The indicators for the seven Tone, [Function], [Transpose]

26 Listening to Songs The FP-7 contains 65 built-in songs. Here’s how to select and play back one of these songs. About the name of the internal song

27 Listening to Songs If a song is playing while the song select screen is displayed, you can rewind the song by holding down the [-] button, or fast

28 Listening to Songs Here’s how to adjust the volume when song is playing back.When you’re playing along with a song, this lets you adjust the volum

29 Listening to Songs The internal songs and the songs in internal memory or USB memory can be played repeatedly in succession. This function is call

3 Introduction Thank you, and congratulations on your choice of the FP-7. To ensure that you obtain the maximum enjoyment and take full advantage of

30 Listening to Songs With the internal songs, you can select the performance part that is to be played back.You can also practice each hand separate

31 Listening to Songs Here’s how to adjust the volume that a part will have after you’ve pressed a track button to mute the playback while playing ba

32 Listening to Songs Here’s how to play back songs that you’ve saved in internal memory. You can save the songs you’ve recorded and the songs that a

33 Listening to Songs Here’s how you can listen to songs that are saved on USB memory (sold separately). You can also use the keyboard to play along

34 Listening to Songs To stop playback, press the [Play] button once more.The next time you press the [Play] button, playback will resume from the po

35 Performing The FP-7 features over 300 different internal sounds, allowing you to enjoy performing with sounds suitable for many different types of

36 Performing The FP-7 lets you create your own original organ sounds.Of the Tone buttons, the tones assigned to the [TW Organ] (Tone Wheel Organ) bu

37 PerformingWhat’s the feet?“Feet” is a term that began as a measurement of the length of the pipes in a pipe organ.The pipes that produce the basic

38 Performing When the [Registration] button is lit, Tone buttons ([1]–[7]) can be pressed to select registrations.If you want to select a tone, pres

39 Performing Selecting the Footage to Adjust the Volume 3. Hold down the [Display] button and press the [+] button to get the following screen. 4. H

4 Main FeaturesSerious piano performanceThe FP-7 provides the sounds of a high-quality concert grand piano coupled with the PHA II keyboard, which

40 Performing Adding Sparkle to the Sound (Percussion) Percussion adds an attack-type sound to the beginning of the note to give the sound more crisp

41 Performing You can play two different tones from a single key at the same time. This method of performance is called “Dual Play.”As an example, le

42 Performing You can select the part that will take priority for effects if the Upper tone and Lower tone have different effect settings when you’re

43 Performing Performing with the keyboard divided at a certain key into a left side and a right side is called “Split Play,” and the point at which

44 Performing When the [Registration] button is lit, Tone buttons ([1]–[7]) can be pressed to select registrations.If you want to select a tone, pres

45 Performing Changing the Upper Tone 1. Press the Tone button to choose a tone group. 2. Press the [-] or [+] button to select a variation tone. Cha

46 Performing You can change the split point (the key at which the keyboard is divided).The split point can be set to any value from B1 through B6.Th

47 Performing You can change the volume balance of the Upper and Lower Tones in Dual Play (p. 41) and Split Play (p. 43). fig.Panel-Balance.eps 1. Us

48 Performing You can change the touch sensitivity, or response of the keys.You can adjust the keyboard touch as appropriate for the playing strength

49 Performing You can apply a reverb effect to the notes you play on the keyboard. With the reverb effect, you obtain a pleasant reverberation, makin

5 Contents Introduction ... 3 About the Manual...3Co

50 Performing In addition to reverb, you can apply a variety of effects to the FP-7’s sounds.These are referred to as “effects.” With the FP-7, you c

51 Performing The Rotary effect is applied to some Organ tones you can select with the [Organ] button. When one of these tones is selected, you can u

52 Performing By using the “Transpose” function you can transpose the keyboard or the key in which the song plays back. This is convenient when you’r

53 Performing The transpose setting will return to “0” when you select another song. Example: Playing a Song in the Key of E Major After Transpositi

54 Performing You can perform while the metronome sounds.The FP-7 provides a versatile Metronome function. You can adjust the volume or time signatur

55 Performing 1. Press the [Display] button several times so it’s lit in orange. The tempo is displayed. fig.d-Tempo.eps 2. Press the [-] or [+] butt

56 Performing You can add liveliness to the sound to give it superb clarity and distinctness. fig.Panel-SoundControl.eps 1. Press the [Sound Control]

57 Performing You can use the equalizer to adjust the tonal quality.This allows you to adjust the tonal character by boosting or decreasing the low-f

58 Performing You can switch the equalizer settings to apply different changes to the tonal character.The FP-7 provides four equalizer settings. 1. W

59 Performing The FP-7 lets you play audio files saved on USB memory (sold separately) while you perform. This is called the “Audio Key” function.The

6 Contents Recording ... 92 Recording a New Song...93Recordin

60 Performing 2. While holding down the [Audio Key] button, and use the [-] [+] buttons to select an audio file set. When you take your finger off th

61 Performing If you play the B 0 key, a screen like the following will appear.If a key is assigned to play an audio file, the color of the key in th

62 Performing If USB memory (sold separately) containing audio files is not connected, you’ll be able to play audio files that are built into the FP-

63 Performing The FP-7 lets you create your own piano sound by adjusting settings such as the sympathetic resonance of the piano strings. This functi

64 Performing * These settings are valid only when the [Multi Effects] button is on (lit) and the effect type is set to “Damper Resonance.” 5. Use th

65 Performing When you’ve used Piano Designer to create a piano sound that you particularly like, you can save it in internal memory. Settings you sa

66 Playing Along with Rhythms “Session Partner” Lets You Enjoy Playing with a Session-Like Feel “Session Partner” is an easy-to-use function that pla

67 Playing Along with Rhythms Now, let’s try performing along with Session Partner.Since a wide variety of musical genres is provided, be sure to use

68 Playing Along with Rhythms Stopping the Session Partner Performance 1. Press the [Session Partner] button. When you press the [Session Partner] bu

69 Playing Along with Rhythms Here’s how to adjust the volume when Session Partner is playing. 1. While holding down the [Session Partner] button, pr

7 Contents Connecting to MIDI Devices...147What’s MIDI?...147Maki

70 Playing Along with Rhythms Now, try changing the Rhythm being performed.Let’s try changing the rhythm to suit the song you want to play. fig.Panel

71 Playing Along with Rhythms The FP-7 has an optimal tempo for each Rhythm.You can change the tempo of the selected Rhythm. Furthermore, you can cha

72 Playing Along with Rhythms The FP-7 has an optimal chord progression pattern for each Rhythm.You can change the chord progression pattern if you w

73 Playing Along with Rhythms Performing with the keyboard divided at a certain key into a left side and a right side is called “Split Play.” While i

74 Playing Along with Rhythms The point at which the keyboard is divided is called the “split point”; you can also change this split point. For more

75 Playing Along with Rhythms Each rhythm has two varieties of accompaniment patterns; the original accompaniment pattern, and a more colorful variat

76 Playing Along with Rhythms You can save a chord progression you’ve specified using the left-hand section of the keyboard. ffig.Panel-Session-6.eps

77 Playing Along with Rhythms The song may not play back correctly if the performance is played with a different beat than the one used in recording

78 Saving Your Favorite Performance Settings You can save your favorite combinations of performance settings, including the tone selection, the dual/

79 Saving Your Favorite Performance Settings For details on the settings that are saved as a registration, refer to “Settings Stored in a Registratio

8 USING THE UNIT SAFELY Do not disassemble or modify 002c Do not open (or modify in any way) the unit or its AC adaptor...

80 Saving Your Favorite Performance Settings You can use the [Registration] button to store the currently selected buttons and Session Partner settin

81 Saving Your Favorite Performance Settings Changing the Name of a Registration 3. Hold down the [Display] button and use the [-] [+] buttons to sel

82 Saving Your Favorite Performance Settings Settings you’ve stored with the [Registration] button can be recalled instantly.The recommended settings

83 Saving Your Favorite Performance Settings Here’s how the twenty-eight registrations stored with the [Registration] button can be saved in internal

84 Saving Your Favorite Performance Settings 6. Use the [-] [+] buttons to select the desired character. Selecting the Save Destination for Registrat

85 Saving Your Favorite Performance Settings Here’s how an entire set of registrations you saved in internal memory or USB memory can be loaded back

86 Saving Your Favorite Performance Settings 5. While holding down the [Display] button, use the [-] [+] buttons to select “Media.” 6. Use the [-] [+

87 Saving Your Favorite Performance Settings Here’s how to delete an entire registration set that’s been saved in internal memory or USB memory. For

88 Saving Your Favorite Performance Settings 6. While holding down the [Display] button, use the [-] [+] buttons to select “Media.” 7. Use the [-] [+

89 Saving Your Favorite Performance Settings Registration sets you saved in internal memory can be copied to USB memory. Conversely, registration set

9 USING THE UNIT SAFELY Avoid extended use at high volume 010 This device, either by itself or used in conjunction with headphones, amps, and/or spea

90 Saving Your Favorite Performance Settings 6. While holding down the [Display] button, use the [-] [+] buttons to select “Type.” 7. Use the [-] [+]

91 Saving Your Favorite Performance Settings You can assign a pedal to successively switch registrations. Each time you press the pedal, you will swi

92 Recording You can easily record your performances.You can play back a performance you have recorded to check what and how you played, and play mel

93 Recording Here’s how to record just your own keyboard performance without using Session Partner or an internal song. fig.Panel-RecNew.eps Settings

94 Recording Stopping Recording 5. Press the [Play] button. Recording will stop.When you stop recording, the “Song” indication in the song select scr

95 Recording Here’s how you can play along with an internal song and record your performance.The song being played back will be recorded together wit

96 Recording 3. Press the [Rec] button once again. The following screen appears. 4. Press the button of the track you want to record, so the button i

97 Recording Stopping Recording 6. Press the [Play] button. Recording will stop. Listening to the Recorded Performance 7. Press the [-] button to ret

98 Recording You can easily record session performances to the session partner. fig.Panel-RecSession.eps The Session Partner performance can be recor

99 Recording Starting Recording 5. Start the Session Partner performance (p. 67, p. 73). The Rhythm starts to play, while simultaneously recording be