Roland FC-300 Instrukcja Użytkownika Strona 58
- Strona / 72
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
58
Appendices
If other operational problems occur, first check by using the following solutions:
If this does not resolve the problem, then contact your dealer or a nearby Roland
service station.
The power doesn’t come on
• Is the specified AC adaptor (PSA series; sold separately) properly
connected?
Check connections again. Never use any AC adaptor other than one specified for
use with the FC-300 (p. 12).
• Are the batteries dead?
Replace the new batteries (p. 11).
Power not turning off
• Is there an RRC2 IN device connected?
Switch the RRC2 IN device’s POWER switch to OFF (p. 13).
MIDI messages are not transmitted/received
• Are the MIDI cables broken?
Try another set of MIDI cables.
• Is the FC-300 correctly connected to the other MIDI device?
Check connections with the other MIDI device.
• Do the MIDI channel settings of both devices match?
Make sure that the MIDI channels of both devices match (p. 52).
• Is the number pedal indicator flashing?
Program Change messages are not transmitted while the number pedal’s
indicator is flashing.
Pressing a number pedal and selecting the number transmits the message.
• When you send messages from the FC-300, make sure the FC-300 is set to
the settings appropriate for sending data.
Check the
“Setting the Method Used for Transmitting Program Change
messages in Standard Mode (PC Mode)”
(p. 47) or
“Transmitting Control
Change Messages”
(p. 17) (p. 21) (p. 30).
Expression pedal switch not switching on and off / Fails to
completely shut off the volume when used as a volume pedal
• Has the pedal gone out of adjustment?
Adjust the expression pedal (p. 56).
Display is faint or flickering
Check the following settings.
“Adjusting the LCD Contrast”
(p. 46)
“Reducing Battery Consumption (Economy Mode)”
(p. 46)
“Switching How the Pedal Indicators Light”
(p. 51)
Troubleshooting
The batteries that are supplied
with the unit is for temporary
use, intended primarily for
testing this unit.
When running on power
supplied by an RRC2 IN
device, the power is switched
on regardless of the position of
the POWER switch.
Although the FC-300’s EXP
pedals are adjusted for optimal
performance when shipped
from the factory, extended use
over time and under certain
usage conditions may result in
the pedals going out of
adjustment.
FC-300_e1.book 58 ページ ２００７年４月２４日 火曜日 午前１０時１０分
- Owner’s Manual 1
- USING THE UNIT SAFELY 2
- IMPORTANT NOTES 4
- Table of Contents 5
- Top Panel (Buttons) 8
- Top Panel (Pedals) 9
- Rear Panel 10
- Making the Connections 11
- (e.g., the VG-99) 12
- Introduction 13
- About the MODES 14
- Switching Modes 15
- Standard Mode 16
- Using the Expression Pedals 17
- MIDI Messages 19
- Control Change Mode 21
- System Exclusive Mode 28
- Patch Mode 29
- Switches 30
- Creating Patches 33
- Editing MIDI Streams 34
- Template 37
- How to Copy MIDI Streams 39
- How to Delete MIDI Streams 40
- Setting the Amp Control 41
- Other Features 46
- (Bank Extent) 48
- Setting the Device ID 52
- Setting the Bank Select Value 53
- Appendices 55
- Error Messages 57
- Troubleshooting 58
- MIDI Implementation 59
- 3. One-way Transfer Procedure 60
- 1. Recognized Receive Data 62
- 2. Transmitted Data 62
- 4. Parameter Address Map 64
- (Model ID = 00H 00H 20H) 64
- MIDI Implementation Chart 67
- Specifications 68
- 04564278 07-04-1N 72
Powiązane produkty i podręczniki dla Instrumenty muzyczne Roland FC-300
(136 strony)Wiley 978-0-7645-4942-7 manuales
Manuales del propietario y guías del usuario para Manuales de software Wiley 978-0-7645-4942-7.
Ofrecemos 1 manuales en pdf Wiley 978-0-7645-4942-7 para descargar gratis por tipos de documentos: Ficha de datos
Komentarze do niniejszej Instrukcji